Great things are on the horizon

Something big is brewing! Our store is in the works and will be launching soon!

Recently Viewed Products

38%
Bosch GDS 18V-400 Heavy Duty Cordless Impact Wrench
Add to wishlist
Compare

Bosch GDS 18V-400 Heavy Duty Cordless Impact Wrench

Original price was: ₹51,000.00.Current price is: ₹31,675.00.
In Stock
Add to cart
TAPARIA P3 860 150 Tip No.0 Philips Screw Drivers (Green)
Add to wishlist
Compare

TAPARIA P3 860 150 Tip No.0 Philips Screw Drivers (Green)

In Stock
  • The blade is made from high grade Silicon - Manganese steel which provides high strength
  • This steel gives spring effect also.The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
  • Other makes offer same hardness through out the length of the blade, which is not scientific.
  • Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip.
  • Higher the hardness higher is wear resistance.The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.
Read more
STANLEY FATMAX SBD716-B1 20V MAX CORDLESS Brushless Hammer Drill Driver 13mm Keyless Chuck 1900 RPM Heavy Duty Power Tool for Drilling & Screwdriving – BARE TOOL
Add to wishlist
Compare

STANLEY FATMAX SBD716-B1 20V MAX CORDLESS Brushless Hammer Drill Driver 13mm Keyless Chuck 1900 RPM Heavy Duty Power Tool for Drilling & Screwdriving – BARE TOOL

In Stock
  • Brushless motor technology: Engineered with a high-efficiency brushless motor that provides up to 50% more runtime, increased power, and extended tool durability compared to standard brushed motors. Heavy-duty keyless chuck: Equipped with a durable 13 mm metal keyless chuck to securely accept large-diameter drill bits while facilitating fast, tool-free bit changes during intense workflows.
  • Versatile dual-speed gearbox: Features two speed settings operating at 600 RPM and 1 900 RPM to easily transition between high-torque screwdriving and fast, high-speed drilling across multiple materials. Ergonomic and compact design: Built with a lightweight, balanced, and manageable form factor to maximize user comfort, minimize fatigue during overhead use, and simplify storage in standard tool cases.
  • Model: SBD716-B1 (Bare Tool Only) | Voltage: 20V MAX | Motor Type: High-Efficiency Brushless | Max Torque: 65 Nm | No-Load Speed: 0–600 / 0–1,900 RPM | Chuck Capacity: 13 mm (1/2" Heavy Duty Metal Keyless) | Clutch Settings: 15 + 1 Positions | Max Drilling: Wood - 40 mm, Metal - 13 mm, Masonry/Concrete - 10 mm
  • Precision clutch control: Offers 15 + 1 selectable torque positions to ensure accurate depth adjustments, preventing stripped screws, overdriving, and workpiece surface damage.
  • Applications: Electrical & Plumbing: Running conduit lines, boring structural studs, and mounting junction boxes. Construction & Carpentry: Framing timber, driving heavy-duty lag screws, and securing subfloors. Masonry Work: Drilling anchor holes into concrete, brick wall installations, and mortar repairs.
Read more
48%
Bosch Metal GIS 500 Industrial Temperature Measuring Device
Add to wishlist
Compare

Bosch Metal GIS 500 Industrial Temperature Measuring Device

Original price was: ₹8,800.00.Current price is: ₹4,653.00.
In Stock

About this item

  • Press and go. Temperature on hand
  • Simple – Immediate measuring results at one simple press with the selection of 3 emissivity gradings for more precise measurement
  • Compact - Easy to carry around thanks to the ergonomic housing design with carrying pouch
  • Versatile - Wide temperature measurement range for extreme conditions with press and hold continuous measuring function
  • The measuring tool must not be used for human medical purposes
Add to cart
Taparia 5mm Torx Screw Driver, T-15, Blade Length 75 mm
Add to wishlist
Compare

Taparia 5mm Torx Screw Driver, T-15, Blade Length 75 mm

In Stock
The Taparia 5mm Torx Screw Driver is a reliable tool for all your screwdriving needs. With a blade diameter of 5mm and a blade length of 75mm, this T-15 screwdriver is perfect for various tasks. Made from high-grade silicon manganese steel, the blade is nickel chrome plated for corrosion resistance. It is fully hardened and tempered to withstand high torque requirements. Additionally, the screwdriver is magnetized to easily lift screws from confined spaces or hold them in position. Get the Taparia Torx Screw Driver for efficient and hassle-free screwdriving.

Read more
Join our newsletter for £10 offs

Get our emails for info on new items, sales and much more.

Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!

Völogi deledes ponade eujäjurtad

Autoseligen syr. Nek diarask fröbomba. Nör antipol kynoda nynat. Pressa fåmoska. Aposkop redelingar nede, sektigt.

info@example.com

Need Help?

(+800) 1234 5678 90

Monday – Friday: 9:00-20:00

Saturady: 11:00 – 15:00

support@example.com

Customer Service

Store Information

  • -5% for all order in this week Shop now
  • Free delivery for all orders over $200

Copyright 2025 © Partdo WordPress Theme. All right reserved. Powered by KLBTheme.

payment
Download App on Mobile
app app
soourz
Main Menu Category Menu CONTACT DETAILS

Copyright 2025 © Partdo WordPress Theme. All right reserved. Powered by KLBTheme.

What are you looking for in Partdo?